Advanced - Port Triggers for the Arris SBG6782-ACRouter Sceenshot

Back to the Arris SBG6782-AC



Screenshots from PortForward.com


Advanced - Port Triggering --> get Port or Port Range When the now-open Target Port (21) receives a Request, the Request is routed to the device that tripped the Trigger Port. Configure a Port Trigger/Target for One Port You may want to use a port trigger/target pair to automatically forward requests through one port. To do this, you could create a port trigger with an identical Trigger Start Port and Trigger End Port, like 21, then an identical Target Start Port and Target End Port, like 22, and then selecting UDP, TCP, or Both for the affected protocol. You could then enable the filter by checking the Enabled box and pressing Apply. Later, when a request is sent out through the trigger port, the trigger will be tripped and the target port will be opened. Configure a Port Trigger/Target Pair for a Range of Ports You may want to use a port trigger/target pair to automatically forward requests through a range of ports. To do this, you could create a port trigger with a Trigger Start Port at the beginning of the range (18) and a Trigger End Port at the end of the range (25). You could also create a Target Start Port at the beginning of the range (49) and a Target End Port at the end of the range (55). You could then select UDP, TCP, or Both for the affected protocol and enable the filter by checking the Enabled box and pressing Apply. Later, when a request is sent out through the trigger port range 18 - 25 (inclusive), the trigger will be tripped and the target port range 49 - 55 (inclusive) will be opened. Port Triggering Trigger Range Target Range --> Protocol Each communications protocol uses one of two fundamental protocols to transmit its data on the Internet: User Datagram Protocol (UDP) or Transmission Control Protocol (TCP). Typically, only one or the other is used for any given communications protocol, but sometimes the other is used for special applications --> Description --> Enable Enables the range of ports to be triggered. If this is not enabled, the ports are not triggered -->   --> Start Port The starting port in the range that will trigger a port association --> --> End Port The ending port in the range that will trigger a port association --> --> Start Port The starting port in the range of the target port association --> --> End Port The ending port in the range of the target port association -->   ©2014 ARRIS Group, Inc. ALL RIGHTS RESERVED.
Home > Screenshots > Arris > SBG6782-AC > Advanced - Port Triggers