Wireless - 5GHz 802.11 Radio for the Arris SBG6782-ACRouter Sceenshot

Back to the Arris SBG6782-AC



Screenshots from PortForward.com


Wireless - 802.11 Radio --> Confirm Settings Do you want to continue? Logout SBG6782-AC Wireless - 802.11 Radio Configure the SBG6782-AC's Wi-Fi radio.  2.4 GHz   5 GHz  Wi-Fi Radio Settings Wireless Radio Enable Enabled Disabled Output Power 25% 50% 75% 100% Help Your network's Wi-Fi signal strength is controlled by this setting. The signal strength can be decreased from full power (100%) to reduce the network's range. The power can be decreased to reduce interference to other networks in the area and to limit the access to your network to a smaller geographic area. Band Selection 2.4 GHz 5 GHz Band Selection 2.4 GHz 5 GHz       --> Band Selection 2.4 GHz 5 GHz    802.11 Mode a/n/ac mode n only mode Help Select the 802.11 communication modes to best match the other devices on your network. You may see improved performance if you limit your network to only Wireless-N (802.11n) devices. Select additional modes for maximum compatibility with older equipment. Retain the default settings of b/g/n for 2.4GHz and a/n for 5GHz if you are unsure. 802.11n Support Required --> Help Setting this to Yes will require all devices to use 802.11n to connect to the network. Wireless-N (802.11n) technology is a standard for high-speed Wi-Fi networks. Newer devices are typically capable of using Wireless-N. However, when devices connect to the network that are not using N-mode, the performance of the N-mode devices will be impacted. --> Bandwidth 20 Mhz 40 Mhz 80 Mhz    Current Bandwidth: 20MHz Help The standard bandwidth for 2.4 GHz Wi-Fi networks is 20 MHz. Increasing the bandwidth can increase the amount of data that the network can carry. However, if the SBG6782-AC detects another Wi-Fi network using frequencies in the wider bandwidth, the SBG6782-AC will automatically reduce the bandwidth to the normal 20 MHz width. Sideband Lower None Upper    Current Sideband: Channel 36 40 44 48 149 153 157 161 165    Current Channel: 149 ***Interference Level: Acceptable Spatial Auto On Off --> Beamforming Transmission (BFR) Disabled Enabled   Beamforming Reception (BFE) Disabled Enabled   --> ©2015 ARRIS Group, Inc. ALL RIGHTS RESERVED.
Home > Screenshots > Arris > SBG6782-AC > Wireless - 5GHz 802.11 Radio