Advanced Options for the Arris SBG6900-ACRouter Sceenshot

Back to the Arris SBG6900-AC



Screenshots from PortForward.com


Advanced - Options --> Confirm Settings Do you want to continue? Logout SBG6900-AC Advanced - Options Home > Advanced > Options The Internet is made up of many different protocols, each with specific needs and uses. The settings below give you the ability to control which of these protocols are supported by the SBG6900-AC. In general, these should not be altered. Warning - Your modem will be enabled for Remote Access when you press the Apply button. Warning - Your modem needs to be rebooted for SIP ALG to be enabled. Warning - Your modem needs to be rebooted for SIP ALG to be disabled.   WAN Blocking Enable IPsec Pass-through Enable PPTP Pass-through Enable Remote Config Management Enable Multicast Enable Enable UPnP Enable Enable NAT ALG Status FTP Enable TFTP Enable Kerb88 Enable Kerb1293 Enable ICQ Enable ICQTalk Enable IRC666x Enable IRC7000 Enable IRC8000 Enable H225 Enable RSVP Enable NetBios Enable MSN Enable PPTP Enable Net2Phone Enable RTSP Enable IKE Enable SIP Enable --> Pass-through MAC Addresses (example: 01:23:45:67:89:AB)                                   MAC Addresses entered: 0/32 ©2015 ARRIS Group, Inc. ALL RIGHTS RESERVED.
Home > Screenshots > Arris > SBG6900-AC > Advanced Options