Port Triggering for the Arris TG862GRouter Sceenshot

Back to the Arris TG862G



Screenshots from PortForward.com


Advanced > Port Triggering - Xfinity xFinity Hi admin     Logout Change Password Battery 97% On Internet Status: Connected -->4 computers connected On Wireless Status: Connected Mode: B,G,N 4 computers connected Low Low Security Low Security Gateway At a Glance Connection Status Xfinity Network Local IP Network WiFi Firewall Software Hardware System Hardware Battery LAN Wireless Wizard Connected Devices Computers Parental Control Managed Sites Managed Services Managed Devices Reports Advanced Port Forwarding Port Triggering Port Blocking --> DMZ Device Discovery Troubleshooting Logs Diagnostic Tools Reset/Reboot Gateway Change Password Advanced > Port Triggering Manage external access to specific ports on your home network. Manage external access to specific ports on your home network using automatic triggering. Port triggering monitors outbound traffic. When the router detects traffic on the specified outbound port, it remembers the IP address of the computer that sent the data and triggers the incoming port. The incoming port forwards the incoming traffic to the triggering computer. This enables computers behind the NAT enabled gateway to access special server/application on the Internet. Click on ADD to add new ports or EDIT to change the current ports. Changing settings may impact the performance of the Gateway. more Enable Port Triggering: Enabled Disabled Enabled Disabled --> Port Triggering + Add Port Trigger Service Name Service Type Trigger Port(s) Target Port(s) Active   FTP ANY 10.0.0.1 TCP/UDP:20 100 200 Edit x FTP ANY 10.0.0.1 TCP/UDP:20 100 200 Edit x FTP ANY 10.0.0.1 TCP/UDP:20 100 200 Edit x Xfinity.com customerCentral User Guide CM Status Page
Home > Screenshots > Arris > TG862G > Port Triggering