Wi-Fi Connection for the Arris TG862GCT - XfinityRouter Sceenshot

Back to the Arris TG862GCT - Xfinity



Screenshots from PortForward.com


Xfinity xFinity Gateway At a Glance Email Notification --> Connection Status Xfinity Network Local IP Network Wi-Fi MoCA Firewall Software Hardware System Hardware Battery* LAN Wireless USB Wizard Connected Devices Devices Cordless Handsets Network Storage Range Extenders Parental Control Managed Sites Managed Services Managed Devices Reports Advanced Port Forwarding Port Triggering QoS DMZ Dynamic DNS Device Discovery Media Sharing DLNA DLNA Settings Digital Media Servers Digital Media Players Media Index File Sharing Local Users Troubleshooting Logs Diagnostic Tools Reset/Restore Gateway Change Password Gateway > Connection > Wi-Fi Manage your Wi-Fi connection settings. Click EDIT next to the Network Name you'd like to modify its Wi-Fi network settings: Network Name (SSID), Mode, Security Mode, Channel, Network Password (Key), and Broadcasting feature. Click ADD Wi-Fi PROTECTED SETUP (WPS) CLIENT to connect Wi-Fi products to your network using the WPS Method. MAC Filter Setting is specific to each Network Name (SSID). Select a MAC Filtering Mode. Allow- All (Default): All wireless client stations can connect to the Gateway; no MAC filtering rules. Allow: Only the devices in the "Wireless Control List" are allowed to connect to the Gateway. Deny: Wireless devies in the "Wireless Control List" are not allowed to connect to the Gateway. Wireless Control List: Displays the wireless devices (by Network Name and MAC Address) that were manually added or auto-learned. Auto-Learned Wireless Devices are currently connected to the Gateway. Manually-Added Wireless Devices: Enter a unique name and MAC address for the wireless device you want to manually add, then click ADD. Wi-Fi Radio (2.4 GHz) : Enable Disable Wi-Fi Radio (5 GHz)    : Enable Disable Private Wi-Fi Network Name Frequency Band MAC Address Security Mode   Public Wi-Fi Network Name Frequency Band MAC Address Security Mode   XHS-69A08A75 2.4 GHz 00:26:F3:3E:F3:39 WPAWPA2-PSK (TKIP/AES) Edit --> GRE Settings GRE Enable: Disable Enable Maximum Number Of Concurrent Clients: DSCP Value For Tunneled Packets: WLAN GW Primary IP Address(IPv4/IPv6): / WLAN GW Secondary IP Address(IPv4/IPv6): / WLAN GW Ping Count: WLAN GW Health Check Ping Interval: sec WLAN GW Failover Threshold: WLAN GW Failure Ping Interval: min Number Of Hours To Reattempt Connection To Primary WLAN GW: hrs Circuit-ID SSID: Disable Enable Remote-ID: Disable Enable 2.4GHz Wi-Fi Basic Setting Mode: 802.11 g/n 802.11 b/g/n Transmit Power: 100% 75% 50% 25% 12.5% Channel Selection: Automatic Manual Channel: 1 2 3 4 5 6 7 8 9 10 11 2.4GHz Wi-Fi Advanced Setting BG Protection Mode: Auto Manual IGMP Snooping: Disable Enable Operation Mode: Mixed Mode Green Field Channel Bandwidth: 20 20/40 Guard Interval: 800ns 400ns Auto Reverse Direction Grant Disable Enable Extension Channel: 2442MHz (Channel5) Extension Channel: 2447MHz (Channel6) Extension Channel: 2452MHz (Channel7) Extension Channel: 2457MHz (Channel8) Extension Channel: 2462MHz (Channel9) 2437MHz (Channel1) Extension Channel: 2427MHz (Channel2) 2467MHz (Channel10) Extension Channel: 2472MHz (Channel11) 2432MHz (Channel3) Extension Channel: 2437MHz (Channel4) Extension Channel: 2442MHz (Channel5) Extension Channel: 2447MHz (Channel6) Extension Channel: 2452MHz (Channel7) Aggregation MSDU (A-MSDU) Disable Enable Auto Block Ack: Disable Enable Decline BA Request: Disable Enable HT TxStream: 3 2 1 HT RxStream: 3 2 1 WMM Power Save: This item depends on WMM. Enable WMM in atleast one SSID. to make this work. STBC: Disable Enable 5GHz Wi-Fi Basic Setting Mode: 802.11 a/n/ac 802.11 ac 802.11 n/ac 802.11 n Transmit Power: 100% 75% 50% 25% 12.5% Channel Selection: Automatic Manual Channel: 36 40 44 48 52 56 60 64 100 104 108 112 116 132 136 140 149 153 157 161 165 5GHz Wi-Fi Advanced Setting IGMP Snooping: Disable Enable Operation Mode: Mixed Mode Green Field Channel Bandwidth: 20 20/40 20/40/80 Guard Interval: 800ns 400ns Auto Reverse Direction Grant Disable Enable Aggregation MSDU (A-MSDU) Disable Enable Auto Block Ack: Disable Enable Decline BA Request: Disable Enable DFS Channel Selection In Auto Mode: Disable Enable HT TxStream: 3 2 1 HT RxStream: 3 2 1 WMM Power Save: This item depends on WMM. Enable WMM in atleast one SSID. to make this work. STBC: Disable Enable MAC Filter Setting You can control the Wi-Fi access to the USG using the below Mac-Filter settings. SSID: MAC Filtering Mode: Allow-All Allow Deny Wi-Fi Control List (up to 16 items)      # Device Name MAC Address Wi-Fi Control List (up to 16 items)      # Device Name MAC Address Wi-Fi Control List (up to 16 items)      # Device Name MAC Address Wi-Fi Control List (up to 16 items)      # Device Name MAC Address Auto-Learned Wi-Fi Devices     Device Name MAC Address Auto-Learned Wi-Fi Devices     Device Name MAC Address Auto-Learned Wi-Fi Devices     Device Name MAC Address Auto-Learned Wi-Fi Devices     Device Name MAC Address Manually-Added Wi-Fi Devices     Device Name         MAC Address          : : : : : Wi-Fi Client Setup Configuration (WPS) You must enable WPS to connect your device to this device WPS: Enable Disable WPS: Enable Disable Security: Encryption: AP PIN: WPS Pin Method: Enable Disable Connect to your WPS-supported device SSID: Push Button (recommended)     Push the WPS button on the Gateway or click "PAIR WITH MY WIFI CLIENT" below to connect your     Wi-Fi client to your network. PIN Number     If your Wi-Fi client supports WPS (PIN Type), enter the PIN Number here.     Enter Wi-Fi Client's PIN Xfinity.com customerCentral User Guide
Home > Screenshots > Arris > TG862GCT - Xfinity > Wi-Fi Connection