Quickstart for the Aztech DSL1000EW-LRouter Sceenshot

Back to the Aztech DSL1000EW-L



Screenshots from PortForward.com


Quickstart Protocols: PPPoE PPPoA IPoE IPoA Bridge Encapsulation Mode: LLC/SNAP-BRIDGING VC/MUX PVC Settings VPI: [0-255]        VCI: [32-65535]   NAT Firewall PPP Settings PPP Username:   PPP Password:   LAN Configuration IP Address:   Subnet Mask:     Disable DHCP Server   Enable DHCP Server Start IP Address:   End IP Address:   WAN IP Settings Enter information provided to you by your ISP to configure the WAN IP settings.   Obtain an IP address automatically   Use the following IP address: WAN IP Address: WAN Subnet Mask: Wireless Settings Enable Wireless Enter the wireless network name (also known as SSID). SSID: Wireless Channel: Auto 1 2 3 4 5 6 7 8 9 10 11     Network Authentication: Open WEP-Shared WPA WPA2 Mixed WPA2/WPA WPA2 Preauthentication: Disabled Enabled Network Re-auth Interval: WPA Pre-Shared Key:    Click here to display WPA Group Rekey Interval: RADIUS Server IP Address: RADIUS Port: RADIUS Key: WPA Encryption: WEP Encryption: Encryption Strength: 128-bit 64-bit Current Network Key: Network Key Network Key 2: Network Key 3: Network Key 4:   Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys   Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys Save  - Saves configuration data.
Home > Screenshots > Aztech > DSL1000EW-L > Quickstart