Quick Setup for the Aztech DSL1015EN-LRouter Sceenshot

Back to the Aztech DSL1015EN-L



Screenshots from PortForward.com


This page allow you to check the device infomation, control the device connection. Device Info Internet Account Settings Wireless Settings Device Info top Model: DSL1015EN(L) Board ID: 96358M Base MAC Address: \ Firmware Version: 230.106s.2-001 Software Version: 3.10L.02.A2pB023n8.d21k Bootloader (CFE) Version: 1.0.37-10.1 Wireless Driver Version: RT2860 iNIC 2.0.0.0 Internet Connection: Please wait, attempting to connect.... Please wait, attempting to disconnect.... Connection is up. Connection is down. Authenication failed. Please check your username and password. Cannot establish internet connection. Please check your DSL line, ensure that the DSL LED is ON and stable. Also check your username and password. Please wait, attempting to connect.... Connection is down. Please check whether WAN cable is connected correctly. IP Address:   \ Default Gateway:   Primary DNS Server:   \ Secondary DNS Server:   \ Internet Login Account Settings top Connection Type: PPPoE PPPoA Encapsulation Mode: LLC VCMux Username: Password:         Please note the username format: Singnet     >> [email protected]     >> [email protected]     >> [email protected] Pacific Net     >> [email protected]  M1     >> [email protected]   Please wait, attempting to connect.... Please wait, attempting to disconnect.... Connection is up. Connection is down. Authenication failed. Please check your username and password. Cannot establish internet connection. Please check your DSL line, ensure that the DSL LED is ON and stable. Also check your username and password. Please wait, attempting to connect.... Connection is down. Please check whether WAN cable is connected correctly. You have changed Connection Type, it needs reboot to validate. Wireless -- Settings top Allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID), restrict the channel set based on country requirements, set the network authentication method, selecting data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. Click "Save/Apply" to configure the basic wireless options. Enable Wireless AP Mac Address: \ Non-Broadcast SSID SSID: Channel: Current Channel: Network Authentication: WEP-Open WEP-Shared 802.1X WPA-Enterprise WPA-PSK WPA2-Enterprise WPA2-PSK Mixed WPA2/WPA-Enterprise Mixed WPA2/WPA-PSK WPA2 Preauthentication: Disabled Enabled Network Re-auth Interval: WPA Pre-Shared Key: Click here to display WPA Group Rekey Interval: RADIUS Server IP Address: RADIUS Port: RADIUS Key: WPA Encryption: WEP Encryption: Encryption Strength: 128-bit 64-bit Network Key: Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys   WSC Add Client This feature is available only when WPA PSK or WPA2 PSK is configured. Add a client: Push-Button PIN          Click here to display WSC Configure AP Setup AP: Push-Button   PIN   Help
Home > Screenshots > Aztech > DSL1015EN-L > Quick Setup