Wireless Security for the Aztech DSL600EWRouter Sceenshot

Back to the Aztech DSL600EW

Screenshots from PortForward.com

>Wireless>Wireless Security function uiDoCancel() { jslGoTo(null,"home"); } New Connection   New Connection   ADSL Modulation   ADSL Modulation   Connection Scan   Connection Scan   quickstart   quickstart     UPnP   UPnP   SNTP   SNTP   SNMP   SNMP   IGMP Proxy   IGMP Proxy   TR-068 WAN Access   TR-068 WAN Access   TR-069   TR-069   NAT Services   NAT Services   DNS Proxy   DNS Proxy   Dynamic DNS Client   Dynamic DNS Client   Easy Connect Configuration   Easy Connect Configuration   Port Triggering   Port Triggering   Port Forwarding   Port Forwarding   Bridge Filters   Bridge Filters   Web Access Control   Web Access Control   SSH Access Control   SSH Access Control     Egress   Egress   Ingress   Ingress   QoS Shaper Configuration   QoS Shaper Configuration   Policy Routing Configuration   Policy Routing Configuration     Static Routing   Static Routing   Routing Table   Routing Table   Dynamic Routing   Dynamic Routing     LAN Configuration   LAN Configuration   LAN Clients   LAN Clients   Ethernet Switch Configuration   Ethernet Switch Configuration     Save Settings Restart Access Point Restart Router Setup Basic Advanced Wireless Security Status Help --> Wireless --> Setup --> Configuration Multiple SSID --> Security --> Security Management WDS --> Wireless Security Select an SSID and its security profile: TonyAP None WEP 802.1x WPA Enable WEP Wireless Security Authentication Type:  Open Shared Both Select Encryption Key Cipher 64 bits 128 bits 256 bits 64 bits 128 bits 256 bits 64 bits 128 bits 256 bits 64 bits 128 bits 256 bits Enter 10, 26, or 58 hexadecimal digits for 64, 128 or 256 bit Encryption Keys respectively. e.g., AA AA AA AA AA for a key length of 64 bits.   Note: you must Restart Access Point for Wireless changes to take effect.
Home > Screenshots > Aztech > DSL600EW > Wireless Security