Home Network Configuration for the Aztech DSL7000GRV-SRouter Sceenshot

Back to the Aztech DSL7000GRV-S



Screenshots from PortForward.com


Local Area Network (LAN) Setup Configure the Residential Gateway IP Address and Subnet Mask for LAN interface.     IP Address:    Subnet Mask:    Host Name:    Domain Name:          Enable LAN side firewall          Disable DHCP Server          Enable DHCP Server                  Start IP Address:                  End IP Address:                  Subnet Mask:                  Leased Time (hour):          Configure the second IP Address and Subnet Mask for LAN interface                  IP Address:                  Subnet Mask:   Enable Public IP Pass Through        Enable UPnP        Enable IGMP Snooping            Standard Mode            Blocking Mode   Enable DHCP Server Relay        DHCP Server IP Address:   Device Info -- DHCP Leases DHCP Server assigned devices: Reserved Devices: Host Name MAC Address IP Address Remove Manual devices reserve: MAC Address: (example:00:D0:B7:23:A4:69) IP Address: (example:192.168.1.34) Hostname: (Max length:40 characters)              Broadband Status Notification Enable Detection of Common Broadband Connection Issue Residential Gateway Reboot The LAN side IP address of the modem has changed. The Residential Gateway is rebooting. Close the Residential Gateway Configuration window and wait for 2 minutes before reopening your web browser with new IP. Residential Gateway Reboot The LAN side IP address of the modem has changed. Force your LAN side computer(s) to acquire the new address.
Home > Screenshots > Aztech > DSL7000GRV-S > Home Network Configuration