Quick Setup for the Aztech DSL7000GRV-SRouter Sceenshot

Back to the Aztech DSL7000GRV-S



Screenshots from PortForward.com


This page allows you to check the device information, control the device connection. Device Info Connection Method Internet Login Account Settings Voice - SIP Settings Wireless - Settings Device Info top Model: DSL7000GRV(S) Board ID: \ Base MAC Address: \ Serial No: \ Firmware Version: 261.6.1-015A Software Version: V4.12L.02 Bootloader (CFE) Version: 1.0.38-112.37 System Uptime: 62 Hours 55 Mins 43 Secs --> Internet Connection: Please wait, attempting to connect.... Please wait, attempting to disconnect.... Connection is up. Connection is down. Connection is up. Now Connection Mode is Bridge. Authentication failed. Please check your username and password. Cannot establish internet connection. Please check your DSL/ETHERNET line, ensure that the DSL/ETHERNET LED is ON and stable. Also check your inputs. Please wait, attempting to connect.... Connection is down. Please check whether WAN cable is connected correctly. IPv6 6rd:   Disabled IP Address:   \ Subnet Mask:   Default Gateway:   \ Primary DNS Server:   \ Secondary DNS Server:   \ Voice Connection: Connection is up. Connection is down. IP Address:   Default Gateway:   Primary DNS Server:   Secondary DNS Server:   IPTV Connection: Connection is up. Connection is down. IP Address:   \ Default Gateway:   \ Primary DNS Server:   \ Secondary DNS Server:   \ Connection Method top Ethernet WAN DSL Auto Internet Login Account Settings top Connection Type: PPPoE IPoE Bridging Username: For example: if your user ID is "bob", enter user name as "[email protected]" Password:       Connection Method: Static DHCP IP Address: Subnet Mask: Default Gateway: Primary DNS: Secondary DNS:   Please wait, attempting to connect.... Please wait, attempting to disconnect.... Connection is up. Connection is down. Connection is up. Now Connection Mode is Bridge. Authentication failed. Please check your username and password. Cannot establish internet connection. Please check your ETHERNET line, ensure that the ETHERNET LED is ON and stable. Also check your inputs. Please wait, attempting to connect.... Connection is down. Please check whether WAN cable is connected correctly. You have changed Connection Type, it needs reboot to validate. Internet Login Account Settings top Connection Type: --> PPPoE --> PPPoA Encapsulation Mode: --> LLC --> VCMux Username: --> For example: if your user ID is "bob", enter user name as "[email protected]" Password:   -->       Please wait, attempting to connect.... Please wait, attempting to disconnect.... Connection is up. Connection is down. Authentication failed. Please check your username and password. Cannot establish internet connection. Please check your DSL line, ensure that the DSL LED is ON and stable. Also check your inputs. Please wait, attempting to connect.... Connection is down. Please check whether WAN cable is connected correctly. You have changed Connection Type, it needs reboot to validate. Voice - SIP Settings top Enter the SIP parameters and click Save button to save the parameters and start the voice application. Line Enable Username Password Status 1 2     --> Wireless - Settings top Allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID), restrict the channel set based on country requirements, set the network authentication method, selecting data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. Click "Save/Apply" to configure the basic wireless options. --> Enable Wireless AP Mac Address: \ --> Non-Broadcast SSID SSID: Channel: --> Auto 1 2 3 4 5 6 7 8 9 10 11 12 13 Current Channel: "2" Network Authentication: WEP-Open WEP-Shared 802.1X WPA-Enterprise WPA-PSK WPA2-Enterprise WPA2-PSK Mixed WPA2/WPA-Enterprise Mixed WPA2/WPA-PSK WPA2 Preauthentication: Disabled Enabled Network Re-auth Interval: WPA Pre-Shared Key: Click here to display --> Click here to display WPA Group Rekey Interval: RADIUS Server IP Address: RADIUS Port: RADIUS Key: WPA Encryption: --> AES TKIP+AES WEP Encryption: --> Disabled Enabled Encryption Strength: 128-bit 64-bit Network Key: Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys WPS Setup       Enable WPS Enabled Disabled       WPS AP PIN \   WPS Add Client This feature is available only when WPA PSK or WPA2 PSK is configured. Add a client: Push-Button PIN          Click here to display --> Click here to display WPS Configure AP Setup AP: Push-Button   PIN   Help
Home > Screenshots > Aztech > DSL7000GRV-S > Quick Setup