USB for the Belkin F1P1242EGauRouter Sceenshot

Back to the Belkin F1P1242EGau



Screenshots from PortForward.com


USB This iiNet IAD supports the USB Host controller function. You can enable this function and plug-in your USB device to share it with other people over your LAN network. The supported USB devices include: USB mass storage: hard disk, flash disk or single slot card reader, up to 1 device. USB-Hub: up to 1 device. After you plug-in the USB device into this iiNet IAD. You may click "Update Status" to see the device information in the "Current USB Device Status" table. Three different file system formats are supported: FAT12, FAT16 and FAT32, and up to 4 partitions could be activated at the same time. For your convenience, the iiNet IAD will activate the first 4 partitions automatically when you plug-in an USB storage device. If you have more than 4 partitions in your storage device, you could "Deactivate" some unused partitions and "Activate" other partitions that you would like to use. Please activate the partitions before you configure the "File Server", "FTP Server" and "Web FTP Server". USB mass storage: hard disk, flash disk or single slot card reader, up to 1 device. USB printer. USB-Hub: up to 1 device. After you plug-in the USB device into iiNet IAD. You may click "Update Status" to see the device information in the "Current USB Device Status" table. Three different file system formats are supported: FAT12, FAT16 and FAT32, and up to 4 partitions could be activated at the same time. For your convenience, iiNet IAD will activate the first 4 partitions automatically when you plug-in an USB storage device. If you have more than 4 partitions in your storage device, you could "Deactivate" some unused partitions and "Activate" other partitions you would like to use. Please activate the partitions before you configure the "File Server", "FTP Server" and "Web FTP Server". -->   Enable USB function Current USB Device Status: Mass storage Disconnected