Utilities for the Belkin F5D7231-4v5Router Sceenshot
Utilities > Home | Help | Logout Internet Status: Connected LAN Setup LAN Settings DHCP Client List Internet WAN Connection Type DNS MAC Address Wireless Channel and SSID Security Use as Access Point Firewall Virtual Servers Client IP Filters MAC Address Filtering DMZ DDNS WAN Ping Blocking Security Log Utilities Parental Control Restart Router Restore Factory Default Save/Backup Settings Restore Previous Settings Firmware Update System Settings Utilities > This screen lets you manage different parameters of the Router and perform certain administrative functions. Parental Control Belkin's Parental Control protects you and your children/employees from objectionable content on the web. Parental Control comes pre-configured to block many types of web content, but is custom configurable to be more or less restrictive. Any web site can easily be set to be either, always blocked, or always allowed. Restart Router Sometimes it may be necessary to Reset or Reboot the Router if it begins working improperly. Resetting or Rebooting the Router will not delete any of your configuration settings. Restore Factory Defaults Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you backup your settings before you restore all of the defaults. Save/Backup Current Settings You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you backup your current configuration before performing a firmware update. Restore Previous Saved Settings This option will allow you to restore a previously saved configuration. Firmware Update From time to time, Belkin may release new versions of the Router's firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. System Settings The System Settings page is where you can enter a new administrator password , set the time zone, enable remote management, turn on and off UPNP, turn on and off Auto Update Firmware, and turn on and off the NAT function of the Router.