LAN Setup for the Belkin F5D7234-4v5Router Sceenshot

Back to the Belkin F5D7234-4v5

Screenshots from

-->   LAN Setup   LAN Settings   DHCP Client List   Internet WAN   Connection Type   DNS   MAC Address   Wireless   Channel and SSID   Security   Wi-Fi Protected Setup   Use as an Access Point   MAC Address Control   Firewall   Virtual Servers   Client IP Filters   MAC Address Filtering   DMZ   DDNS   WAN Ping Blocking   Security Log   Utilities   Restart Router   Restore Factory Defaults   Save/Backup Settings   Restore Previous Settings   Firmware Update   System Settings      LAN >     Your Router is equipped with a DHCP server that will automatically assign IP addresses to each computer on your network. The factory default settings for the DHCP server will work in most any application. If you need to make changes to the settings, you can do so. The changes that you can make are:  Change the Internal IP address of the Router. The default =  Change the Subnet Mask. The default =  Enable/Disable the DHCP Server Function. Default= ON (Enabled)  Specify the Starting and Ending IP Pool Address. Default = Starting: 2 / Ending: 100  Specify the IP address Lease Time. Default= Forever  Specify a local Domain Name. Default = Belkin To make changes, click "LAN Settings" on the LAN tab to the left. The Router will also provide you with a list of all client computers connected to the network. To view the list, click "DHCP client list" on the LAN tab to the left.
Home > Screenshots > Belkin > F5D7234-4v5 > LAN Setup