Utilities for the Belkin F5D7234-4v5Router Sceenshot

Back to the Belkin F5D7234-4v5

Screenshots from PortForward.com

-->   LAN Setup   LAN Settings   DHCP Client List   Internet WAN   Connection Type   DNS   MAC Address   Wireless   Channel and SSID   Security   Wi-Fi Protected Setup   Use as an Access Point   MAC Address Control   Firewall   Virtual Servers   Client IP Filters   MAC Address Filtering   DMZ   DDNS   WAN Ping Blocking   Security Log   Utilities   Restart Router   Restore Factory Defaults   Save/Backup Settings   Restore Previous Settings   Firmware Update   System Settings      Utilities >     This screen lets you manage different parameters of the Router and perform certain administrative functions. Submit Invalid MAC address, it is a null address   --> Restart Router Sometimes it may be necessary to Reset or Reboot the Router if it begins working improperly. Resetting or Rebooting the Router will not delete any of your configuration settings.   Restore Factory Defaults Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you backup your settings before you restore all of the defaults.   Save/Backup Current Settings You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you backup your current configuration before performing a firmware update.   Restore Previous Saved Settings This option will allow you to restore a previously saved configuration.   Firmware Update From time to time, Belkin may release new versions of the Router's firmware. Firmware updates contain feature improvements and fixes to problems that may have existed.   System Settings The System Settings page is where you can enter a new administrator password, set the time zone, enable remote management and turn on and off the NAT functionof the Router.
Home > Screenshots > Belkin > F5D7234-4v5 > Utilities