Connection Type for the Belkin F5D9230-4v5Router Sceenshot

Back to the Belkin F5D9230-4v5



Screenshots from PortForward.com


WAN > Connection Type   Home | Help | Logout     Internet Status: Connected    LAN Setup     LAN Settings     DHCP Client List    Internet WAN     Connection Type     DNS     MAC Address    Wireless     Channel and SSID     Security     Use as Access Point     MAC Address Control    Firewall     Virtual Servers     Client IP Filters     DMZ     DDNS     WAN Ping Blocking     Security Log    Utilities     Restart Router     Restore Factory Default     Save/Backup Settings     Restore Previous Settings     Firmware Update     System Settings    WAN > Connection Type     Select your connection type: Dynamic   A Dynamic type of connection is the most common. If you use a cable modem, then most likely you will have a dynamic connection. If you have a cable modem or you are not sure of your connection type, use this. Static   A Static IP address connection type is less common than others. Use this selection only if your ISP gave you an IP address that never changes. PPPoE   If you use a DSL modem and/or your ISP gave you a User Name and Password, then your connection type is PPPoE. Use this connection type. PPTP   [European Countries Only]. This type of connection is most common in European countries. If your ISP has specifically told you that you use PPTP and has supplied you with the proper PPTP information, then use this option. Telstra BigPond   [Australia Only] Users of Telstra BigPond Cable or DSL will use this option to configure the connection.     " type=button>
Home > Screenshots > Belkin > F5D9230-4v5 > Connection Type