LAN Setup for the Belkin F6D4230-4v1Router Sceenshot

Back to the Belkin F6D4230-4v1



Screenshots from PortForward.com


LAN Router Setup Utility Home  |   Help  |   Logout     Internet Status: Connected       LAN Setup         LAN Settings         DHCP Client List       Internet WAN         Connection Type         DNS         MAC Address       Wireless         Channel and SSID         Security         Wi-Fi Protected Setup         Use as Access Point         MAC Address Control       Firewall         Virtual Servers         Client IP Filters         MAC Address Filtering         DMZ         DDNS         WAN Ping Blocking         Security Log       Utilities         Restart Router         Restore Factory Default         Save/Backup Settings         Restore Previous Settings         Firmware Update         System Settings        LAN >   Your Router is equipped with a DHCP server that will automatically assign IP addresses to each computer on your network. The factory default settings for the DHCP server will work in most any application. If you need to make changes to the settings, you can do so. The changes that you can make are: - Change the Internal IP address of the Router. The default = 192.168.2.1 - Change the Subnet Mask. The default = 255.255.255.0 - Enable/Disable the DHCP Server Function. Default= ON (Enabled) - Specify the Starting and Ending IP Pool Address. Default = Starting: 2 / Ending: 100 - Specify the IP address Lease Time. Default= Forever - Specify a local Domain Name. Default = Belkin To make changes, click "LAN Settings" on the LAN tab to the left. The Router will also provide you with a list of all client computers connected to the network. To view the list, click "DHCP client list" on the LAN tab to the left.
Home > Screenshots > Belkin > F6D4230-4v1 > LAN Setup