Connection Type for the Belkin F7D3302v1Router Sceenshot

Back to the Belkin F7D3302v1



Screenshots from PortForward.com


LAN Setup LAN Settings DHCP Client List Static Route Internet WAN Connection Type DNS MAC Address Wireless Channel and SSID Security Wi-Fi Protected Setup --> Guest Access Use as Access Point --> Firewall Virtual Servers MAC Address Filtering Access Control DMZ DDNS WAN Ping Blocking Security Log Utilities Restart Router Restore Factory Defaults Save/Backup Settings Restore Previous Settings Firmware Update System Settings Self Healing    WAN > Connection Type   Select your connection type: Dynamic   A Dynamic type of connection is the most common. If you use a cable modem, then most likely you will have a dynamic connection. If you have a cable modem or you are not sure of your connection type, use this. Static   A Static IP address connection type is less common than others. Use this selection only if your ISP gave you an IP address that never changes. PPPoE   If you use a DSL modem and/or your ISP gave you a User Name and Password, then your connection type is PPPoE. Use this connection type. PPTP   [European Countries Only]. This type of connection is most common in European countries. If your ISP has specifically told you that you use PPTP and has supplied you with the proper PPTP information, then use this option. Telstra Bigpond/OptusNet Cable   Use this option for Bigpond Cable and OptusNet Cable connections only. L2TP -->   Age of Empires II: The Age of Kings -->     " type=button name=arc_action>
Home > Screenshots > Belkin > F7D3302v1 > Connection Type