Connection Type for the Belkin F9K1001v3Router Sceenshot

Back to the Belkin F9K1001v3



Screenshots from PortForward.com


WAN > Connection Type Home  |   Help  |   Logout     Internet Status: Connected   LAN Setup   LAN Settings   DHCP Client List   Internet WAN   Connection Type   DNS   MAC Address   Wireless   Channel and SSID   Security   Wi-Fi Protected Setup   Use as an Access Point   Firewall   Virtual Servers   MAC Address Filtering   DMZ   DDNS   WAN Ping Blocking   Security Log   Utilities   Restart Router   Restore Factory Defaults   Save/Backup Settings   Restore Previous Settings   Firmware Update   System Settings   Self Healing    WAN > Connection Type     Select your connection type: Dynamic   A Dynamic type of connection is the most common. If you use a cable modem, then most likely you will have a dynamic connection. If you have a cable modem or you are not sure of your connection type, use this. Static   A Static IP address connection type is less common than others. Use this selection only if your ISP gave you an IP address that never changes. PPPoE   If you use a DSL modem and/or your ISP gave you a User Name and Password, then your connection type is PPPoE. Use this connection type. PPTP   [European Countries Only]. This type of connection is most common in European countries. If your ISP has specifically told you that you use PPTP and has supplied you with the proper PPTP information, then use this option.   --> Telstra Bigpond/OptusNet Cable   Use this option for Bigpond Cable and OptusNet Cable connections only.     " type=button name=itsbutton0>
Home > Screenshots > Belkin > F9K1001v3 > Connection Type