Connection Type for the Belkin F9K1102v2Router Sceenshot

Back to the Belkin F9K1102v2



Screenshots from PortForward.com


WAN > Connection Type       Home  |   Help  |   Logout Internet Status: Connected   LAN Setup   LAN Settings   DHCP Client List   Internet WAN   Connection Type   DNS   MAC Address   IPv6   Connection Settings NEW   Parental Controls   Website Filters NEW   Access Control   Wireless   Channel and SSID   Security   Wi-Fi Protected Setup   Guest Access   Use as an Access Point   Media Features   Intellistream NEW   Traffic Chart   Media Server NEW   Firewall   Virtual Servers   MAC Address Filtering   DMZ   DDNS   WAN Ping Blocking   Security Log   Utilities   Restart Router   Restore Factory Defaults   Save/Backup Settings   Restore Previous Settings   Firmware Update   System Settings   Self Healing    WAN > Connection Type   Select your connection type: Dynamic   A Dynamic type of connection is the most common. If you use a cable modem, then most likely you will have a dynamic connection. If you have a cable modem or you are not sure of your connection type, use this. Static   A Static IP address connection type is less common than others. Use this selection only if your ISP gave you an IP address that never changes. PPPoE   If you use a DSL modem and/or your ISP gave you a User Name and Password, then your connection type is PPPoE. Use this connection type. PPTP   [European Countries Only]. This type of connection is most common in European countries. If your ISP has specifically told you that you use PPTP and has supplied you with the proper PPTP information, then use this option. Telstra Bigpond/OptusNet Cable   Use this option for Bigpond Cable and OptusNet Cable connections only.   -->     " type=button>
Home > Screenshots > Belkin > F9K1102v2 > Connection Type