IPv6 Connection Settings for the Belkin F9K1102v2Router Sceenshot

Back to the Belkin F9K1102v2



Screenshots from PortForward.com


IPv6 > Connection Settings       Home  |   Help  |   Logout Internet Status: Connected   LAN Setup   LAN Settings   DHCP Client List   Internet WAN   Connection Type   DNS   MAC Address   IPv6   Connection Settings NEW   Parental Controls   Website Filters NEW   Access Control   Wireless   Channel and SSID   Security   Wi-Fi Protected Setup   Guest Access   Use as an Access Point   Media Features   Intellistream NEW   Traffic Chart   Media Server NEW   Firewall   Virtual Servers   MAC Address Filtering   DMZ   DDNS   WAN Ping Blocking   Security Log   Utilities   Restart Router   Restore Factory Defaults   Save/Backup Settings   Restore Previous Settings   Firmware Update   System Settings   Self Healing    IPv6 > Connection Settings   Devices connected to your router can talk to each other using native IPv6 packets. IPv6 packets on the LAN will automatically be sent to all LAN interfaces(Ethernet ports and both 2.4 GHz and 5 GHz wireless networks). When IPv6 pass-through is enabled, IPv6 packets will also be copied to the WAN interface.(When enabled, this creates a direct, non-secure connection to the internet.) Please contact your ISP directly for information about their support for IPv6.     IPv6 Pass-Through > Enable Disable           
Home > Screenshots > Belkin > F9K1102v2 > IPv6 Connection Settings