WAN Profile for the Billion BiPAC 7300G RARouter Sceenshot

Back to the Billion BiPAC 7300G RA



Screenshots from PortForward.com


Configuration WAN Profile Parameters Main Port Protocol PPPoE (RFC2516, PPP over Ethernet) PPPoA (RFC2864, PPP over AAL5) MPoA (RFC1483/RFC2684, Multiprotocol Encapsulation over AAL5) Pure Bridge PPPoE with Pass-through Description VPI / VCI  /  Encap. method VcMux LLC Username Password Service Name NAT Enable IP (0.0.0.0: Auto) Auth. Protocol Auto Pap Chap Obtain DNS Automatic Primary Secondary Connection Always On Idle Timeout min(s) MTU Username Password NAT Enable IP (0.0.0.0: Auto) Auth. Protocol Auto Pap Chap Obtain DNS Automatic Primary Secondary Connection Always On Idle Timeout min(s) MTU Encap. mode Bridged Routed NAT Enable Keep Alive Enable IP (0.0.0.0: Auto) Netmask Gateway Obtain DNS Automatic Primary Secondary MAC Spoofing Enable   *** Please wait. It takes few seconds to apply the new change.    Edit Protocol Interface Description VPI VCI Encap. method NAT IP Delete PPPoA wan_main 8 35 LLC Enable 0.0.0.0
Home > Screenshots > Billion > BiPAC 7300G RA > WAN Profile