WAN Interface Configuration for the Billion BiPAC 7404VNOXRouter Sceenshot

Back to the Billion BiPAC 7404VNOX



Screenshots from PortForward.com


SUBM Configuration WAN Interface WAN Interface Main Port ADSL 3G EWAN Dual WAN (Current Main Port: ADSL) Mode Failover Parameters WAN1 ADSL(ipwan) 3G(ipwan2) EWAN(ipwan3) WAN2 ADSL(ipwan) 3G(ipwan2) EWAN(ipwan3) Time Schedule Disabled Always On TimeSlot1 TimeSlot2 TimeSlot3 TimeSlot4 TimeSlot5 TimeSlot6 TimeSlot7 TimeSlot8 TimeSlot9 TimeSlot10 TimeSlot11 TimeSlot12 TimeSlot13 TimeSlot14 TimeSlot15 TimeSlot16 Keep Backup Interface Connected Enable Connectivity Decision Not in service when probing failed after consecutive times. Failover Probe Cycle Every seconds Fallback Probe Cycle Every seconds Detect Rule (either one)      No Ping      Ping Gateway      Ping Host Service Detection Enable Connectivity Decision Not in service when probing failed after consecutive times. Probe Cycle Every seconds Probe WAN1 Ping Gateway Ping Host Probe WAN2 Ping Gateway Ping Host
Home > Screenshots > Billion > BiPAC 7404VNOX > WAN Interface Configuration