Operation Mode for the CD-R King IP04177Router Sceenshot

Back to the CD-R King IP04177



Screenshots from PortForward.com


Operation Mode Operation Mode You can setup different modes to LAN and WLAN interface for NAT and bridging function. Gateway: In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN ports share the same IP to ISP through WAN port. The connection type can be setup in WAN page by using PPPOE, DHCP client, PPTP client , L2TP client or static IP. Bridge: In this mode, all ports are bridged together and NAT function is disabled. All the WAN related function and firewall are not supported. Wireless ISP: In this mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN. You must set the wireless to client mode first and connect to the ISP AP in Site-Survey page. The connection type can be setup in WAN page by using PPPOE, DHCP client, PPTP client , L2TP client or static IP.   
Home > Screenshots > CD-R King > IP04177 > Operation Mode