Setup Wizard for the CD-R King IP04177Router Sceenshot

Back to the CD-R King IP04177



Screenshots from PortForward.com


Setup Wizard Wizard Setup The setup wizard will guide you to configure access point for first time. Please follow the setup wizard step by step. Welcome to Setup Wizard. The Wizard will guide you the through following steps. Begin by clicking on Next. Setup Operation Mode Choose your Time Zone Setup LAN Interface Setup WAN Interface Wireless LAN Setting Wireless Security Setting Operation Mode You can setup different modes to LAN and WLAN interface for NAT and bridging function. Gateway: In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN ports share the same IP to ISP through WAN port. The connection type can be setup in WAN page by using PPPOE, DHCP client, PPTP client , L2TP client or static IP. Bridge: In this mode, all ports are bridged together and NAT function is disabled. All the WAN related function and firewall are not supported. Wireless ISP: In this mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN. You must set the wireless to client mode first and connect to the ISP AP in Site-Survey page. The connection type can be setup in WAN page by using PPPOE, DHCP client, PPTP client , L2TP client or static IP.   Time Zone Setting You can maintain the system time by synchronizing with a public time server over the Internet.    Enable NTP client update Time Zone Select : (GMT-12:00)Eniwetok, Kwajalein (GMT-11:00)Midway Island, Samoa (GMT-10:00)Hawaii (GMT-09:00)Alaska (GMT-08:00)Pacific Time (US,Canada); Tijuana (GMT-07:00)Arizona (GMT-07:00)Mountain Time (US,Canada) (GMT-06:00)Central Time (US,Canada) (GMT-06:00)Mexico City, Tegucigalpa (GMT-06:00)Saskatchewan (GMT-05:00)Bogota, Lima, Quito (GMT-05:00)New York,Eastern Time (US,Canada) (GMT-05:00)Indiana (East) (GMT-04:00)Atlantic Time (Canada) (GMT-04:00)Caracas, La Paz (GMT-04:00)Santiago (GMT-03:30)Newfoundland (GMT-03:00)Brasilia (GMT-03:00)Buenos Aires, Georgetown (GMT-02:00)Mid-Atlantic (GMT-01:00)Azores, Cape Verde Is. (GMT)Casablanca, Monrovia (GMT)Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London (GMT+01:00)Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna (GMT+01:00)Belgrade, Bratislava, Budapest, Ljubljana, Prague (GMT+01:00)Barcelona, Madrid (GMT+01:00)Brussels, Copenhagen, Madrid, Paris, Vilnius (GMT+01:00)Paris (GMT+01:00)Sarajevo, Skopje, Sofija, Warsaw, Zagreb (GMT+02:00)Athens, Istanbul, Minsk (GMT+02:00)Bucharest (GMT+02:00)Cairo (GMT+02:00)Harare, Pretoria (GMT+02:00)Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius (GMT+02:00)Jerusalem (GMT+03:00)Baghdad, Kuwait, Riyadh (GMT+03:00)Moscow, St. Petersburg, Volgograd (GMT+03:00)Mairobi (GMT+03:30)Tehran (GMT+04:00)United Arab Emirates Dubai, Muscat (GMT+04:00)Baku, Tbilisi (GMT+04:30)Kabul (GMT+05:00)Ekaterinburg (GMT+05:00)Islamabad, Karachi, Tashkent (GMT+05:30)Bombay, Calcutta, Madras, New Delhi (GMT+06:00)Astana, Almaty, Dhaka (GMT+06:00)Colombo (GMT+07:00)Bangkok, Hanoi, Jakarta (GMT+08:00)Beijing, Chongqing, Hong Kong, Urumqi (GMT+08:00)Perth (GMT+08:00)Singapore (GMT+08:00)Taipei (GMT+09:00)Osaka, Sapporo, Tokyo (GMT+09:00)Seoul (GMT+09:00)Yakutsk (GMT+09:30)Adelaide (GMT+09:30)Darwin (GMT+10:00)Brisbane (GMT+10:00)Canberra, Melbourne, Sydney (GMT+10:00)Guam, Port Moresby (GMT+10:00)Hobart (GMT+10:00)Vladivostok (GMT+11:00)Magadan, Solomon Is., New Caledonia (GMT+12:00)Auckland, Wllington (GMT+12:00)Fiji, Kamchatka, Marshall Is. NTP Server : 192.5.41.41 - North America 192.5.41.209 - North America 208.184.49.9 - North America 131.188.3.220 - Europe 130.149.17.8 - Europe 203.60.1.2 - Australia 203.117.180.36 - Asia Pacific   LAN Interface Setup This page is used to configure the parameters for local area network which connects to the LAN port of your Access Point. Here you may change the setting for IP address, subnet mask, DHCP, etc.. IP Address : . . . Subnet Mask : . . .   WAN Interface Setup This page is used to configure the parameters for Internet network which connects to the WAN port of your Access Point. Here you may change the access method to static IP, DHCP, PPPoE or PPTP by click the item value of WAN Access type. WAN Access Type : Static IP DHCP PPPoE PPTP L2TP IP Address : . . . Subnet Mask : . . . Default Gateway : . . . User Name : Password : IP Address : . . . Subnet Mask : . . . Default Gateway : . . . Server IP Address : . . . User Name : Password : IP Address : . . . Subnet Mask : . . . Default Gateway : . . . Server IP Address : . . . User Name : Password :    DNS : . . . Wireless Basic Settings This page is used to configure the parameters for wireless LAN clients which may connect to your Access Point. Here you may change wireless encryption settings as well as wireless network parameters Wireless LAN Interface :   Disabled Enabled Mode :   AP Infrastructure Client     SSID :   Band :   2.4 GHz (B) 2.4 GHz (G) 2.4 GHz (N) 2.4 GHz (B+G) 2.4 GHz (G+N) 2.4 GHz (B+G+N) Channel Number :   Auto 1 - 2412MHz 2 - 2417MHz 3 - 2422MHz 4 - 2427MHz 5 - 2432MHz 6 - 2437MHz 7 - 2442MHz 8 - 2447MHz 9 - 2452MHz 10 - 2457MHz 11 - 2462MHz 12 - 2467MHz 13 - 2472MHz   Wireless Security Settings This page allows you setup the wireless security. Turn on WEP or WPA by using Encryption Keys could prevent any unauthorized access to your wireless network. Authentication : Open WEP WPA-PSK WPA2-PSK WEP-SHARE WEP-AUTO Key Length : Wep 64 Bit   Wep 128 Bit Cipher Suite : TKIP   CCMP   TKIP/CCMP Key Format : ASCII(5 characters) HEX (10 characters) Key :
Home > Screenshots > CD-R King > IP04177 > Setup Wizard