Wireless Basic Settings for the Cisco EPC3825Router Sceenshot

Back to the Cisco EPC3825



Screenshots from PortForward.com


Basic Settings Cisco EPC3825 EuroDocsis 3.0 Gateway EPC3825 Setup Wireless Security Access Restrictions Applications & Gaming Administration Status Log OFF Basic Settings Wireless Security MAC Filter Advanced Settings WDS Settings QoS Basic Settings       Help...   Wireless Network: Enable Disable Wireless Configuration: Manual Wi-Fi Protected Setup         Network Mode: G Only B/G Mixed Mixed Radio Band: Enabled 2.4GHz Channel Width: Standard - 20 MHz Channel Wide - 40 MHz Channel Standard Channel: Auto 1 2 3 4 5 6 7 8 9 10 11 Auto 1 2 3 4 5 6 7 8 9 10 11 Auto Auto Wide Channel: Auto Auto Wireless Network Name (SSID) BSSID Broadcast     SSID 70:71:BC:ED:BD:AA Wi-Fi Protected Setup TM Use one of the following for each Wi-Fi Protected Setup supported device: 1. If your client device has a Wi-Fi Protected Setup button, click or press that button, and then click the button on the right. OR 2. If your client device has a Wi-Fi Protected Setup PIN number, enter that number here  and then click  OR 3. If your client asks for the Gateway's PIN number, enter this number 12345670 in your client device. and then click  Wi-Fi Protected Setup Status: Configured Network Name (SSID): dfa4d5 Security: WPA or WPA2-Personal Wireless Passphrase: **********                   Searching for your client device. Please wait...   If you have not clicked on the Wi-Fi Protected Setup button on your client device, please do so now.             Connecting your client device to your network. Please wait...             Congratulations!   Your client device is now securely connected to your network.     Refer back to your client device for further instructions.     Press " OK " to continue.       Connection Failure!   Your client device failed to connect to the network.     Refer back to your client device for further instructions.     Press " OK " to continue.      
Home > Screenshots > Cisco > EPC3825 > Wireless Basic Settings