Basic Wireless Settings for the Cisco X3000Router Sceenshot

Back to the Cisco X3000



Screenshots from PortForward.com


Basic Wireless Settings --> Firmware Version: v1.0.01    Wireless Linksys X3000   X3000 Setup Wireless Security Storage Access Policy Applications &     Gaming     Administration Status Basic Setup | DDNS | MAC Address Clone | Advanced Routing Basic Wireless Settings |  Wireless Security |  Guest Access |  Wireless MAC Filter Firewall | VPN Passthrough Disk | Media Server | FTP Server | Administration Parental Control | | --> Single Port Forwarding | Port Range Forwarding | Port Range Triggering | --> | DMZ | QoS   Management | Log | Diagnostics | --> | Factory Defaults | Firmware Upgrade Router | Local Network | Wireless Network | --> | DSL Connection | Ports   Configuration View                   :  Manual   Wi-Fi Protected Setup               -->       Network Mode:     Mixed Wireless-B/G Only Wireless-B Only Wireless-G Only Wireless-N Only Disabled           Network Name (SSID):               Channel Width:     Auto (20 MHz or 40 MHz) 20 MHz Only           Wide Channel:     Auto 3 4 5 6 7 8 9           Standard Channel:               SSID Broadcast:    Enabled     Disabled   width=156 bgColor=#e7e7e7 colSpan=3 height=25>        SSID of associating AP:        width=156 bgColor=#e7e7e7 colSpan=3 height=25>        Default IP of associating AP:   . . .     --> width=155 bgColor=#e7e7e7 height=25>        Mode:     Access Point Wireless Bridge   width=155 bgColor=#e7e7e7 height=25>        Bridge Restrict:     Enabled Disabled   width=155 bgColor=#e7e7e7 height=25>        Remote Bridges:             --> width=155 bgColor=#e7e7e7 height=25> : width=155 bgColor=#e7e7e7 height=25> -->                         width=155 bgColor=#e7e7e7 height=25>        :     -->               Help... -->               Save Settings   Cancel Changes    
Home > Screenshots > Cisco > X3000 > Basic Wireless Settings