LAN Setup for the Comtrend NexusLink 5631Router Sceenshot

Back to the Comtrend NexusLink 5631



Screenshots from PortForward.com


Local Area Network (LAN) Setup Configure the DSL Router IP Address and Subnet Mask for LAN interface.  Save button only saves the LAN configuration data.  Save/Reboot button saves the LAN configuration data and reboots the router to make the new configuration effective. IP Address: --> > camille 2008/05/28, Simon.Ting 2008/7/1 always set slave ip to be master+1--> Subnet Mask: Note: Slave IP is automatically configured. Slave IP Address: Slave Subnet Mask: > camille 2008/05/28, Simon.Ting 2008/7/1 always set slave ip to be master+1--> > simon,evan 2007.08.23, Simon 2007/10/22: two bonding images into a single load--> Host Name: Domain Name:   Enable UPnP Force IGMP Proxy version on WAN side   V2   V3 > ChyanLong : End, Config IGMP Proxy version via web UI 2008/11/19 -->   Enable IGMP Snooping   Standard Mode   Blocking Mode   Enhanced IGMP   Disable DHCP Server   Enable DHCP Server        Start IP Address:        End IP Address:        Subnet Mask:        Leased Time (hour):   Setting TFTP Server        TFTP Server :   Enable DHCP Server Relay        DHCP Server IP Address:     Configure the second IP Address and Subnet Mask for LAN interface IP Address: Subnet Mask: Ethernet Media Type   Port 1   Auto 10_Half 10_Full 100_Half 100_Full   Port 2   Auto 10_Half 10_Full 100_Half 100_Full   Port 3   Auto 10_Half 10_Full 100_Half 100_Full   Port 4   Auto 10_Half 10_Full 100_Half 100_Full