PPPoE for the Conceptronic C54BRS4Router Sceenshot

Back to the Conceptronic C54BRS4



Screenshots from PortForward.com


WAN Interface Setup PPPoE Enter the PPPoE User Name and Password assigned by your Service Provider. The Service Name is normally optional, but may be required by some Service Providers. Enter a Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, then the connection will be dropped. You can enable the Connect on Demand option to automatically re-establish the connection as soon as you attempt to access the Internet again. If your Internet Service Provider requires the use of PPPoE, enter the information below. 3.IP Address Info PPPoE Enter the User Name and Password required by your ISP in the appropriate fields. If your ISP has provided you with a "Service Name" enter it in the Service Name field, otherwise, leave it blank.  Use PPPoE Authentication User Name :    Password :    Service Name :    MTU :     (512<=MTU Value<=1492) Connection Type :    Continuous Connect on Demand Manual     Idle Time :     (1-1000 minutes)