Advanced Network for the Cradlepoint MBR1200Router Sceenshot
Back to the Cradlepoint MBR1200
CradlePoint MBR1200 Gateway : Advanced / Network Filter Basic Advanced Modem Tools Status Help Basic Wizard DHCP Network WAN Wireless (Wi-Fi) Advanced Access Control Failover/Load Balance Firewall Gaming Gaming --> Inbound Filter MAC Address Filter Network Routing Special Applications Traffic Shaping Virtual Server Web Filter Wireless (Wi-Fi) Wi-Fi Protected Setup WISH Modem Info GPS Settings Update Tools Admin Dynamic DNS Email Settings Firmware GRE Tunnels IPsec VPN Managed Services Schedules SNMP SysLog System System Check Time User Login Status Device Info Active Sessions GRE Tunnels IPsec VPN Logs Routing Statistics Wireless (Wi-Fi) WISH Sessions Help Menu Basic Advanced Modem Tools Status Glossary Reboot needed Your changes have been saved. The router must be rebooted for the changes to take effect. You can reboot now, or you can continue to make other changes and reboot later. Success The new settings have been applied. Press the button below to continue configuring the router if the previous page doesn't restore in seconds. --> --> Configuration Warnings Advanced Network If you are not familiar with these Advanced Network settings, please read the help section before attempting to modify these settings. UPnP Universal Plug and Play (UPnP) supports peer-to-peer Plug and Play functionality for network devices. Enable UPnP : Allow Users to disable Internet Access : Allow Users to modify Virtual Server Mappings : WAN Ping If you enable this feature, the WAN port of your router will respond to ping requests from the Internet that are sent to the WAN IP Address. Enable WAN Ping Respond: WAN Ping Inbound Filter : Details : Multicast Streams Enable Multicast Streams: PPPoE Pass Through Enable PPPoE Pass Through: Copyright © 2011 CradlePoint Technology Inc. All rights reserved.
