Admin Settings for the Dlink DAP-1522 Bridge ModeRouter Sceenshot

Back to the Dlink DAP-1522 Bridge Mode



Screenshots from PortForward.com


D-Link Corporation | WIRELESS ACCESS POINT | HOME Product Page :  DAP-1522 Hardware Version : rev 1A1  Firmware Version : 1.00  --> Setup Advanced MAINTENANCE Status Help --> Setup Advanced MAINTENANCE Status Help Admin TIME SYSTEM FIRMWARE Logout Administrator Settings admin and user . Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords. --> The 'admin' accounts can access the management interface. The admin has read/write access and can change passwords. By default there is no password configured. It is highly recommended that you create a password to keep your access point secure.   Administrator (The default login name is "admin") --> ADMIN PASSWORD Please enter the same password into both boxes, for confirmation. Login Name:   Password :   Verify Password :   Admin Password > USER PASSWORD Please enter the same password into both boxes, for confirmation. Login Name:   Password :   Verify Password :   Helpful Hints... For security reasons, it is recommended that you change the password for the Admin. Be sure to write down the new passwords to avoid having to reset the access point in case they are forgotten. More...       -->     Copyright © 2008 D-Link Corporation, Inc.
Home > Screenshots > Dlink > DAP-1522 Bridge Mode > Admin Settings