Firmware Upgrade for the Dlink DAP-1522 Bridge ModeRouter Sceenshot

Back to the Dlink DAP-1522 Bridge Mode



Screenshots from PortForward.com


D-Link Corporation | WIRELESS ACCESS POINT | HOME Product Page :  DAP-1522 Hardware Version : rev 1A1  Firmware Version : 1.00  --> Setup Advanced MAINTENANCE Status Help --> Setup Advanced MAINTENANCE Status Help Admin TIME SYSTEM FIRMWARE Logout Firmware Click here to check for an upgrade on our support site. To upgrade the firmware, locate the upgrade file on the local hard drive with the Browse button. Once you have found the file to be used, click the Save Settings below to start the firmware upgrade. --> Use the Firmware section to install the latest firmware code to improve functionality and performance.   Firmware Information Current Firmware Version : 1.00 Current Firmware Date : 16:50:34 02/27/2008 Firmware Upgrade Note: Some firmware upgrades reset the configuration options to the factory defaults. Before performing an upgrade, be sure to save the current configuration from the Maintenance -> Admin screen. To upgrade the firmware, your PC must have a wired connection to the access point. Enter the name of the firmware upgrade file, and click on the Upload button. Upload : Helpful Hints... Firmware updates are released periodically to improve the functionality of your access point and to add features. If you run into a problem with a specific feature of the access point, check our support site by clicking the "Click here to check for an upgrade on our support site" link and see if updated firmware is available for your access point. More...       -->     Copyright © 2008 D-Link Corporation, Inc.
Home > Screenshots > Dlink > DAP-1522 Bridge Mode > Firmware Upgrade