System Settings for the Dlink DAP-1522 Bridge ModeRouter Sceenshot

Back to the Dlink DAP-1522 Bridge Mode



Screenshots from PortForward.com


D-Link Corporation | WIRELESS ACCESS POINT | HOME Product Page :  DAP-1522 Hardware Version : rev 1A1  Firmware Version : 1.00  --> Setup Advanced MAINTENANCE Status Help --> Setup Advanced MAINTENANCE Status Help Admin TIME SYSTEM FIRMWARE Logout System Settings --> The System Settings section allows you to reboot the device, or restore the access point to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you have created. The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file created by device can be uploaded into the unit. System Settings Save To Local Hard Drive : Load From Local Hard Drive :     Restore To Factory Default :     Restore all settings to the factory defaults. Reboot The Device : Helpful Hints... Once your access point is configured the way you want it, you can save the configuration settings to a configuration file. You might need this file so that you can load your configuration later in the event that the access point's default settings are restored. To save the configuration, click the "Save Configuration" button. More...       -->     Copyright © 2008 D-Link Corporation, Inc.
Home > Screenshots > Dlink > DAP-1522 Bridge Mode > System Settings