Wireless Network for the Dlink DAP-1522 Bridge ModeRouter Sceenshot

Back to the Dlink DAP-1522 Bridge Mode



Screenshots from PortForward.com


D-Link Corporation | WIRELESS ACCESS POINT | HOME Product Page :  DAP-1522 Hardware Version : rev 1A1  Firmware Version : 1.00  --> Setup Advanced MAINTENANCE Status Help --> Setup Advanced MAINTENANCE Status Help WIZARD WIRELESS Network Settings Logout Wireless Network Use this section to configure the wireless settings for your access point. Please note that changes made on this section may also need to be duplicated on your Wireless Client.   Wireless Network Settings Wireless Mode :  Bridge Mode      Enable Wireless :  Wireless Network Name :   (Also called the SSID) 802.11 Band :  2.4GHz 5GHz 2.4GHz/5GHz 802.11 Mode :  Mixed 802.11n and 802.11a 802.11a Only 802.11n Only Mixed 802.11n, 802.11g and 802.11b 802.11b Only 802.11g Only 802.11n Only Mixed 802.11g and 802.11b Mixed 802.11n and 802.11g Mixed 802.11 abgn Enable Auto Channel Scan :  Wireless Channel :  36 40 44 48 149 153 157 161 165 1 2 3 4 5 6 7 8 9 10 11 Transmission Rate :  Best(automatic) 54 48 36 24 18 12 9 6  (Mbit/s) Best(automatic) 11 5.5 2 1  (Mbit/s) Best(automatic) 54 48 36 24 18 12 9 6  (Mbit/s) Best(automatic) print_transmission_rate(4);  (Mbit/s) Best(automatic) print_transmission_rate(4); print_transmission_rate(2);  (Mbit/s) Channel Width :  20 MHz Auto 20/40 MHz Visibility Status :  Visible Invisible Site Survey   Type CH Signal BSSID Security SSID Wireless Security Mode Security Mode :  Disable Wireless Security (not recommended) WEP WPA-Personal WPA-Enterprise Disable Wireless Security (not recommended) WEP WPA-Personal WEP WEP Key Length :  64Bit (10 hex digits) 128Bit (28 hex digits)  (length applies to all keys) Key Type :  HEX ASCII WEP Key Length :  64Bit (10 hex digits) 64Bit (5 ascii characters) 128Bit (26 hex digits) 128Bit (13 ascii characters) WEP Key value :  Verify WEP Key value :  --> Default WEP Key :  WEP Key 1 WEP Key 2 WEP Key 3 WEP Key 4 Authentication :  Open Shared Key WPA WPA Mode :  Auto (WPA or WPA2) WPA2 Only WPA Only Cipher Type :  TKIP AES TKIP and AES Group Key Update Interval :   (seconds) Pre-Shared Key Passphrase :  EAP (802.1x) Authentication Timeout :   (minutes) RADIUS Server IP Address :  RADIUS Server Port :  RADIUS Server Shared Secret :  Wi-Fi Protected Setup (Also called WCN 2.0 in Windows Vista) Enable :  Lock Wireless Security Settings :  Current PIN :  85761896   Wi-Fi Protected Status :  Enabled / Not Configured --> Helpful Hints... Changing your Wireless Network Name is the first step in securing your wireless network. Change it to a familiar name that does not contain any personal information. Auto Channel Scan is set by default. It automatcially finds the least loaded channel for interference-free communication. Enabling Hidden Mode is another way to secure your network. With this option enabled, no wireless clients will be able to see your wireless network when they scan to see what's available. For your wireless devices to connect to your access point, you will need to manually enter the Wireless Network Name on each device. If you have enabled Wireless Security, make sure you write down the WEP Key or Passphrase that you have configured. You will need to enter this information on any wireless device that you connect to your wireless network. --> Select the SSID which you want your bridge to connect to. If you have enabled Wireless Security, make sure you write down the WEP Key or Passphrase that you have configured. You will need to enter this information on every wireless device that you connect to your wireless network. More...       -->     Copyright © 2008 D-Link Corporation, Inc.
Home > Screenshots > Dlink > DAP-1522 Bridge Mode > Wireless Network