Recording for the Dlink DCS-1100Router Sceenshot
Back to the Dlink DCS-1100
D-LINK CORPORATION | WIRELESS INTERNET CAMERA | SETUP Product: DCS-1100 Firmware Version: 1.00 LIVE VIDEO SETUP MAINTENANCE STATUS HELP Setup Wizard Network Setup Dynamic DNS Image Setup Audio And Video Motion Detection Time and Date Recording Snapshot Logout recording Here you may configure and schedule the recording of your camera. RECORDING Enable recording Record to : Record to Samba network drive: SD Card SD Card status : Disabled Samba network drive Samba Auth Account Anonymous User name Password Password confirm Server Shared folder Samba status : Disabled Recording Options Resolution profile 1 profile 2 profile 3 profile 4 Record until MB of free space is left (minimum is 32MB) When storage is full: Stop recording Overwrite older recordings Recording Method Event Based (Motion detection triggered recording) Motion detection triggered recording Digital input 1 triggered recording Digital input 2 triggered recording Prerecord seconds (range 0 to 15 seconds) Postrecord seconds (range 0 to 15 seconds) Continuous Scheduled Hours Minutes Hours Minutes Sun Start : End : Mon Start : End : Tue Start : End : Wed Start : End : Thu Start : End : Fri Start : End : Sat Start : End : Helpful Hints.. Enable Recording will allow you to record to SD Card or a Samba network drive based on the selected events. To enable recording, check the Enable Recording checkbox, then select whether to save video to an SD card inserted into the camera’s SD slot or a Samba network drive. Next, select a Scheduling method to specify when the camera should record video. Helpful Hints.. Enable Recording will allow your camera to record the live video to a Samba network drive based on the selected events. To enable recording, select the Enable recording checkbox. Then, select a Scheduling method to specify when the camera will record the video. Copyright © 2009 D-Link Corporation.
