Audio and Video for the Dlink DCS-3110Router Sceenshot
Back to the Dlink DCS-3110
DCS-3110 IP camera Product Page: DCS-3110 Firmware Version: 1.00 Live Video Setup Advanced Maintenance Status Help Wizard Network Setup Dynamic DNS Image Setup Audio and Video Motion Detection Time and Date Event Setup Logout Audio and Video This section allows you to configure the sound and video of your camera. You can configure different settings depending on whether you are viewing content from a PC or a Mobile Phone / PDA. Video quality settings for stream1 Mode MPEG-4 JPEG Frame size 176x144 320x240 640x480 Maximum frame rate 1 fps 2 fps 3 fps 5 fps 8 fps 10 fps 15 fps 20 fps 25 fps 30 fps Video quality Constant bit rate 20 Kbps 30 Kbps 40 Kbps 50 Kbps 64 Kbps 128 Kbps 256 Kbps 512 Kbps 768 Kbps 1 Mbps 1.5 Mbps 2 Mbps 3 Mbps 4 Mbps Fixed quality Medium Standard Good Detailed Excellent Maximum frame rate 1 fps 2 fps 3 fps 5 fps 8 fps 10 fps 15 fps 20 fps 25 fps 30 fps Video quality Medium Standard Good Detailed Excellent Access name Video quality settings for stream2 Mode MPEG-4 JPEG Frame size 176x144 320x240 640x480 Maximum frame rate 1 fps 2 fps 3 fps 5 fps 8 fps 10 fps 15 fps 20 fps 25 fps 30 fps Video quality Constant bit rate 20 Kbps 30 Kbps 40 Kbps 50 Kbps 64 Kbps 128 Kbps 256 Kbps 512 Kbps 768 Kbps 1 Mbps 1.5 Mbps 2 Mbps 3 Mbps 4 Mbps Fixed quality Medium Standard Good Detailed Excellent Maximum frame rate 1 fps 2 fps 3 fps 5 fps 8 fps 10 fps 15 fps 20 fps 25 fps 30 fps Video quality Medium Standard Good Detailed Excellent Access name Audio settings Use Internal Microphone Mute Internal microphone input gain +12 dB +10.5 dB +9 dB +7.5 dB +6 dB +4.5 dB +3 dB +1.5 dB 0 dB -1.5 dB -3 dB -4.5 dB -6 dB -7.5 dB -9 dB -10.5 dB -12 dB -13.5 dB -15 dB -16.5 dB -18 dB -19.5 dB -21 dB -22.5 dB -24 dB -25.5 dB -27 dB -28.5 dB -30 dB -31.5 dB -33 dB -34.5 dB External microphone input 0 db 20 db Audio type AAC GSM-AMR AAC bit rate 16 Kbps 32 Kbps 48 Kbps 64 Kbps 96 Kbps 128 Kbps GSM-AMR bit rate 4.75 Kbps 5.15 Kbps 5.90 Kbps 6.7 Kbps 7.4 Kbps 7.95 Kbps 10.2 Kbps 12.2 Kbps Helpful Hints.. Higher frame size, frame rate and bit rate rate gives better video quality. At the same time, it requires more network bandwidth. For best viewing results on a mobile phone, we suggest setting the Frame Rate to 5fps and the Bit Rate to 20 kbps. Mode: It can be either JPEG or MPEG4. In JPEG mode, the video frames are independent. However, MPEG4 consumes much less network bandwidth than JPEG. Frame Size: Three options exist for the sizes of the video display. It is recommended using 176x144 for mobile viewing and 640x480 for computer viewing. Video Quality: This limits the maximal refresh frame rate, which can be combined with the “Fixed quality” to optimize the bandwidth utilization and video quality. If the User wants to fix the bandwidth utilization regardless of the viideo quality, choose “Constant bit rate” and select the desired bandwidth. Internal microphone input gain: you must configure the gain for your microphones. Please note that dB stands for decibels, a unit of audio measurement. More decibels as a positive value indicates that the sound is louder, while more decibels as a negative value indicates that the sound is quieter. Audio type: AAC: (Advanced Audio Coding) A wide band audio coding algorithm that exploits two primary coding strategies to dramatically reduce the amount of data needed to convey high-quality digital audio. Select a higher bit rate number for better audio quality. GSM-AMR: A standard adapted audio codec by the 3GPP video (3rd Generation Partnership Project). It is an Adaptive Multi Rate-Narrow Band (AMR-NB) speech codec. Select a higher bit rate number for better audio quality. Copyright © 2008 D-Link Corporation/D-Link Systems, Inc. All rights reserved.
