Backup and Restore for the Dlink DCS-3415Router Sceenshot
DCS-3415 IP camera Product Page: DCS-3415 Firmware Version: 1.00 Live Video Setup Advanced Maintenance Status Help Device Management Backup and Restore Firmware Update Logout Backup and Restore You can turn off the front panel LED, restore to factory default and reboot the camera. System Turn off the LED indicator CF Setup Restore Restore all settings to factory default. Reboot Reboot the system Helpful Hints.. "Turn off the front panel LED" Check this option to turn off the LED next to the lens. This will prevent anyone from observing the operation of the IP Camera. "Restore to Factory Default" This option will reset the camera back to its factory default settings. This will remove all the configuration settings that were made previously. "Reboot" This option will restart the camera. Note: Please Format CF card before use. The entire data in the CF card will be erased after formatting. Note: Before you unplug the CF card from the slot, please select "Remove CF card" to ensure that your data is secure. Copyright © 2008 D-Link Corporation/D-Link Systems, Inc. All rights reserved.