Client Setup for the Dlink DCS-3415Router Sceenshot
Back to the Dlink DCS-3415
DCS-3415 IP camera Product Page: DCS-3415 Firmware Version: 1.00 Live Video Setup Advanced Maintenance Status Help Camera Snapshot Client Setup Logout Connection Type Here you can configure the audio and video settings as well as the type of connection your camera uses when viewing it on a network. Stream Options Stream1 Stream2 Media Options Video and Audio Video Only Audio Only Protocol Options UDP unicast UDP multicast TCP HTTP Record Options Folder : File Name Prefix : Add date and time suffix to file name Helpful Hints.. Stream Options - This camera can send 2 streams simultaneously, it can have different configuration for each stream, you can find stream setup at the Setup/Video and Audio setup page. Media Options - Video and Audio: Stream Video and Audio data at the same time with synchronization. Video only: Stream video data only. Audio only: Stream Audio data only. Protocol Options - UDP Protocol: This allows quality real-time performance for audio and video. Some packets may be lost due to network burst traffic and images may be obscured. TCP Protocol: Packet loss is less likely to occur and video displays are more accurate. Record Option - Folder: Select target record folder. Default folder is C:\Record , if this folder doesn’t exist, system will create it when first recording. If this folder is invalid, it will cause recording fail. It can assign a network folder. File name prefix: Add every recorded file with this file name prefix. Add date and time suffix to file name: If checked every file name will distinguished by recording date and time. If no date and time suffix assign, system will use serial number for file name. Copyright © 2008 D-Link Corporation/D-Link Systems, Inc. All rights reserved.
