VPN Tunnels - Add New IPsec Tunnel for the Dlink DFL-1100Router Sceenshot
Back to the Dlink DFL-1100
D-Link DFL-1100 - VPN Tunnels VPN Tunnels Add IPsec tunnel : Name: Local Net: Authentication: PSK - Pre-Shared Key PSK: Retype PSK: Certificate-based Local Identity: Admin - CN=000F3D59AF04 Certificates: Use ctrl/shift click to select multiple certificates. To use ID lists below, you must select a CA certificate. Identity List: (no list) Tunnel type: Roaming Users - single-host IPsec clients IKE XAuth: Require user authentication via IKE XAuth to open tunnel. LAN-to-LAN tunnel Remote Net: Remote Gateway: The gateway can be a numerical IP address, DNS name, or range of IP addresses for roaming / NATed gateways. Route: Automatically add a route for the remote network. Proxy ARP: Publish remote network on all interfaces via Proxy ARP. IKE XAuth client: Pass username and password to peer via IKE XAuth, if the remote gateway requires it. XAuth Username: XAuth Password: IPsec Tunnels Name Local Net Remote Net Remote Gateway VPN2 192.168.1.0/24 Any (No gateway) [ Edit ] [ Add new ] L2TP / PPTP Client Name Type Remote Gateway User IPsec [ Add new PPTP client ] [ Add new L2TP client ] L2TP / PPTP Server Name Type Outer IP Inner IP IPsec [ Add new PPTP server ] [ Add new L2TP server ]