VPN Tunnels - Add New PPTP Client for the Dlink DFL-1100Router Sceenshot
Back to the Dlink DFL-1100
D-Link DFL-1100 - L2TP/PPTP Clients L2TP/PPTP Clients Add PPTP Client : Name: Basic settings: Username: Password: Retype Password: Interface IP: Blank = get IP from server Remote Gateway: Remote Net: Use primary DNS server from tunnel as primary DNS Use secondary DNS server from tunnel as secondary DNS Hint: Use Servers -> DNS Relayer to easily make DNS servers available to internal clients. Dial on demand Idle timeout: minutes Count sending as activity Count receiving as activity Count both as activity Authentication: Protocol: No auth PAP CHAP MSCHAP (MPPE encryption possible) MSCHAPv2 (MMPE encryption possible) MPPE encryption: None 40 bit 56 bit 128 bit Encryption is only possible when using MSCHAP or MSCHAPv2 as authentication protocol Use IPsec encryption PSK - Pre-Shared Key Key: Retype key: Certificate based Local Identity: Admin - CN=000F3D59AF04 Certificates: Use ctrl/shift click to select multiple certificates. To use ID lists below, you must select a CA certificate. Identity List: (no list) IPsec Tunnels Name Local Net Remote Net Remote Gateway VPN2 192.168.1.0/24 Any (No gateway) [ Edit ] [ Add new ] L2TP / PPTP Client Name Type Remote Gateway User IPsec [ Add new PPTP client ] [ Add new L2TP client ] L2TP / PPTP Server Name Type Outer IP Inner IP IPsec [ Add new PPTP server ] [ Add new L2TP server ]