VPN Tunnels - Add New PPTP Server for the Dlink DFL-1100Router Sceenshot
Back to the Dlink DFL-1100
D-Link DFL-1100 - L2TP/PPTP Servers L2TP/PPTP Servers Add PPTP tunnel : Name: Outer IP: Blank = WAN IP Must be WAN IP if IPsec encryption is required Inner IP: Blank = LAN IP IP Pool and settings: Client IP Pool: Proxy ARP dynamically added routes Primary DNS: (Optional) Secondary DNS: (Optional) Use unit's own DNS relayer addresses Primary WINS: (Optional) Secondary WINS: (Optional) Authentication protocol: No authentication PAP CHAP MSCHAP (MPPE encryption possible) MSCHAPv2 (MPPE encryption possible) Authentication source: Local user database Radius Primary Server: port Secondary Server: port Shared Secret: Retype Secret: RADIUS retry: seconds --> MPPE encryption: None - unencrypted 40 bit 56 bit 128 bit (best security) Encryption is only possible when using MSCHAP or MSCHAPv2 as authentication protocol Require IPsec encryption PSK - Pre-Shared Key Key: Retype key: Certificate based Local Identity: Admin - CN=000F3D59AF04 Certificates: Use ctrl/shift click to select multiple certificates. To use ID lists below, you must select a CA certificate. Identity List: (no list) IPsec Tunnels Name Local Net Remote Net Remote Gateway VPN2 192.168.1.0/24 Any (No gateway) [ Edit ] [ Add new ] L2TP / PPTP Client Name Type Remote Gateway User IPsec [ Add new PPTP client ] [ Add new L2TP client ] L2TP / PPTP Server Name Type Outer IP Inner IP IPsec [ Add new PPTP server ] [ Add new L2TP server ]