Port Mapping - Add New for the Dlink DFL-200Router Sceenshot

Back to the Dlink DFL-200



Screenshots from PortForward.com


D-Link DFL-200 - Port Mapping / Virtual Servers     Port Mapping / Virtual Servers Edit new mapping :   Name:   Source Nets: Blank = everyone   ... Users/Groups: "Any" = Any authenticated   Destination IP: Blank = WAN interface IP address   Service: All TCP+UDP+ICMP Custom TCP Custom UDP Custom TCP+UDP ----- bootpc bootps chargen dns-all dns-tcp dns-udp echo epmap finger ftp-inbound ftp-outbound ftp-passthrough gopher gre-encap http http-all http-in http-in-all http-outbound https https-in ident igmp ike imap ipcomp ipip-encap ipsec-ah ipsec-esp ipsec-natt ipsec-suite l2tp-ctl l2tp-encap l2tp-ipsec l2tp-raw ldap ldaps lpr microsoft-ds ms-sql-m ms-sql-s netbios-dgm netbios-name netbios-ssn nfs-all nfs-tcp nfs-udp nntp ntp ping-inbound ping-outbound pop3 pptp-ctl pptp-suite radius radius-acct rcmd rdp rexec rlogin rsvp smb-all smtp smtp-in snmp snmp-trap ssh ssh-in sun-rpc syslog telnet tftp time traceroute-udp wins   Custom source ports: Blank = any port ... destination ports: ... pass to port: ... and up. Blank=no change.   Pass To:   Schedule: - Always - Intrusion Detection / Prevention:   Mode: Inspection only   Prevention   Alerting: Enable IDS/IDP alerting via email for this rule Configured mappings: Name   Source   Destination   Service   Pass to           [ Add new ]          
Home > Screenshots > Dlink > DFL-200 > Port Mapping - Add New