VPN Tunnels - Add New IPsec Tunnel for the Dlink DFL-200Router Sceenshot

Back to the Dlink DFL-200

Screenshots from PortForward.com

D-Link DFL-200 - VPN Tunnels     VPN Tunnels Add IPsec tunnel :   Name:   Local Net: Authentication:   PSK - Pre-Shared Key   PSK:   Retype PSK:   Certificate-based   Local Identity:     Certificates: Use ctrl/shift click to select multiple certificates. To use ID lists below, you must select a CA certificate.   Identity List: (no list) Tunnel type:   Roaming Users - single-host IPsec clients   IKE XAuth: Require user authentication via IKE XAuth to open tunnel.   LAN-to-LAN tunnel   Remote Net:       Remote Gateway:   The gateway can be a numerical IP address, DNS name, or range of IP addresses for roaming / NATed gateways.   Route: Automatically add a route for the remote network.   Proxy ARP: Publish remote network on all interfaces via Proxy ARP.   IKE XAuth client: Pass username and password to peer via IKE XAuth, if the remote gateway requires it.   XAuth Username:   XAuth Password: IPsec Tunnels   Name   Local Net   Remote Net   Remote Gateway       [ Add new ] L2TP / PPTP Client   Name   Type   Remote Gateway   User   IPsec       [ Add new PPTP client ] [ Add new L2TP client ] L2TP / PPTP Server   Name   Type   Outer IP   Inner IP   IPsec       [ Add new PPTP server ] [ Add new L2TP server ]          
Home > Screenshots > Dlink > DFL-200 > VPN Tunnels - Add New IPsec Tunnel