VPN Tunnels - Add New L2TP Server for the Dlink DFL-200Router Sceenshot
Back to the Dlink DFL-200
D-Link DFL-200 - VPN Tunnels L2TP/PPTP Servers Add L2TP tunnel : Name: Outer IP: Blank = WAN IP Must be WAN IP if IPsec encryption is required Inner IP: Blank = LAN IP IP Pool and settings: Client IP Pool: Proxy ARP dynamically added routes Primary DNS: (Optional) Secondary DNS: (Optional) Use unit's own DNS relayer addresses Primary WINS: (Optional) Secondary WINS: (Optional) Authentication protocol: No authentication PAP CHAP MSCHAP (MPPE encryption possible) MSCHAPv2 (MPPE encryption possible) MPPE encryption: None - unencrypted 40 bit 56 bit 128 bit (best security) Encryption is only possible when using MSCHAP or MSCHAPv2 as authentication protocol Require IPsec encryption PSK - Pre-Shared Key Key: Retype key: Certificate based Local Identity: Certificates: Use ctrl/shift click to select multiple certificates. To use ID lists below, you must select a CA certificate. Identity List: (no list) IPsec Tunnels Name Local Net Remote Net Remote Gateway [ Add new ] L2TP / PPTP Client Name Type Remote Gateway User IPsec [ Add new PPTP client ] [ Add new L2TP client ] L2TP / PPTP Server Name Type Outer IP Inner IP IPsec [ Add new PPTP server ] [ Add new L2TP server ]