VPN Tunnels - Add New PPTP Client for the Dlink DFL-200Router Sceenshot

Back to the Dlink DFL-200



Screenshots from PortForward.com


D-Link DFL-200 - VPN Tunnels     L2TP/PPTP Clients Add PPTP Client :   Name: Basic settings:   Username:   Password:   Retype Password:   Interface IP: Blank = get IP from server   Remote Gateway:   Remote Net:   Proxy ARP Publish remote network on all interfaces via Proxy ARP.     Use primary DNS server from tunnel as primary DNS Use secondary DNS server from tunnel as secondary DNS Hint: Use Servers -> DNS Relayer to easily make DNS servers available to internal clients. Dial on demand   Idle timeout: minutes     Count sending as activity Count receiving as activity Count both as activity Authentication:   Protocol: No auth PAP CHAP MSCHAP (MPPE encryption possible) MSCHAPv2 (MPPE encryption possible) MPPE encryption:     None 40 bit 56 bit 128 bit Encryption is only possible when using MSCHAP or MSCHAPv2 as authentication protocol Use IPsec encryption   PSK - Pre-Shared Key   Key:   Retype key:   Certificate based   Local Identity:     Certificates: Use ctrl/shift click to select multiple certificates. To use ID lists below, you must select a CA certificate.   Identity List: (no list) IPsec Tunnels   Name   Local Net   Remote Net   Remote Gateway       [ Add new ] L2TP / PPTP Client   Name   Type   Remote Gateway   User   IPsec       [ Add new PPTP client ] [ Add new L2TP client ] L2TP / PPTP Server   Name   Type   Outer IP   Inner IP   IPsec       [ Add new PPTP server ] [ Add new L2TP server ]          
Home > Screenshots > Dlink > DFL-200 > VPN Tunnels - Add New PPTP Client