WAN Settings for the Dlink DI-724URouter Sceenshot

Back to the Dlink DI-724U



Screenshots from PortForward.com


DI-724U WAN Settings Please select the appropriate option to connect to your ISP. Dynamic IP Address Choose this option to obtain an IP address automatically from your ISP. (For most Cable modem users) Static IP Address Choose this option to set static IP information provided to you by your ISP. PPPoE Choose this option if your ISP uses PPPoE. (For most DSL users) Others PPTP, L2TP and BigPond Cable PPTP (for Europe use only) L2TP (for specific ISPs use only) BigPond Cable (for Australia use only) Static IP Dynamic IP Address PPPoE PPTP L2TP BigPond Cable IP Address : Subnet Mask : Default Gateway : Server IP Address : Host Name : Use Unicasting : (compatibility for some DHCP Servers) Username : Password : Verify Password : Service Name : (optional) Auth Server : MAC Address : (optional) Primary DNS Server : Secondary DNS Server : (optional) Maximum Idle Time : (minutes, 0=infinite) Link Drop Delay : (seconds, 0=immediate) MTU : MTU default =   Connect mode select : Always on Manual On demand Copyright © 2004-2005 D-Link Systems, Inc.
Home > Screenshots > Dlink > DI-724U > WAN Settings