Routing for the Dlink DIR-450Router Sceenshot

Back to the Dlink DIR-450

Screenshots from

D-LINK SYSTEMS, INC | WIRELESS ROUTER | TOOLS Product Page: DIR-450 Hardware Version: A1   Firmware Version: 1.03 Setup Advanced Tools Status Support Admin Time System Firmware DDNS SYSTEM CHECK SCHEDULES Log settings Syslog Email Settings Routing Route SETTINGS : This Routing page allows you to specify custom routes that determine how data is moved around your network. Routing Type : Routing : Static Routing    Dynamic Routing    Routing Table Static Routing Settings : Enable Static Routing : Destination IP : Network Mask : Gateway : Interface : Lan 3G Metric : Static Routing List :   Destination IP Network Mask Gateway Interface Metric Helpful Hints.. Route Settings: Each route has a check box next to it, check this box if you want the route to be enabled. The destination IP address is the address of the host or network you wish to reach. The network mask field identifies the portion of the destination IP in use. The gateway IP address is the IP address of the router, if any, used to reach the specified destination.        Copyright © 2004-2008 D-Link Systems, Inc.
Home > Screenshots > Dlink > DIR-450 > Routing