System Settings for the Dlink DIR-450Router Sceenshot

Back to the Dlink DIR-450

Screenshots from

D-LINK SYSTEMS, INC | WIRELESS ROUTER | TOOLS Product Page: DIR-450 Hardware Version: A1   Firmware Version: 1.03 Setup Advanced Tools Status Support Admin Time System Firmware DDNS SYSTEM CHECK SCHEDULES Log settings Syslog Email Settings Routing System SETTINGS : The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file created by device can be uploaded into the unit. SYSTEM Settings : Save Settings To Local Hard Drive :   Load Settings From Local Hard Drive :     Restore To Factory Default Settings :   Reboots the DIR-450 :   JumpStart : Enable JumpStart function :     Reset JumpStart :   --> Helpful Hints.. Saving System Settings: Once your router is configured they way you want it, you can save these settings to a configuration file that can later be loaded in the event that the router's default settings are restored. To do this, click the Save button next to where it says Save Settings to Local Hard Drive.        Copyright © 2004-2008 D-Link Systems, Inc.
Home > Screenshots > Dlink > DIR-450 > System Settings