Wireless Settings for the Dlink DIR-450Router Sceenshot

Back to the Dlink DIR-450



Screenshots from PortForward.com


D-LINK SYSTEMS, INC | WIRELESS ROUTER | SETUP Product Page: DIR-450 Hardware Version: A1   Firmware Version: 1.03 Setup Advanced Tools Status Support Internet Wireless Settings Network Settings Wireless Network : Use this section to configure the wireless settings for your D-Link Router. Please note that changes made on this section may also need to be duplicated on your Wireless Client. To protect your privacy you can configure wireless security features. This device supports three wireless security modes including: WEP or WPA. Wireless Network Settings : Enable Wireless :   Wireless Network Name :    (Also called the SSID) Wireless Channel :   1 2 3 4 5 6 7 8 9 10 11 6 Enable Auto Channel Scan :   Super G Mode :   Disabled Super G without Turbo Super G with Dynamic Turbo Enable Extended Range Mode :   802.11g Only Mode :   Visibility Status :   Visible   Invisible Wireless Security Mode : Security Mode :   Disable Wireless Security (not recommended) Enable WEP Wireless Security (Good) Enable WPA Wireless Security (Better) Enable WPA2 Wireless Security (Best) Enable WPA2-Auto Wireless Security (Best) WEP : WEP is the wireless encryption standard. To use it you must enter the same key(s) into the router and the wireless stations. For 64 bit keys you must enter 10 hex digits into each key box. For 128 bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. For the most secure use of WEP set the authentication type to "Shared Key" when WEP is enabled. You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64 bit keys, and a maximum of 13 characters for 128 bit keys. Authentication :   Open Shared Key WEP Encryption :   64Bit 128Bit Key Type :   HEX ASCII Default WEP Key :   WEP Key 1 WEP Key 2 WEP Key 3 WEP Key 4 WEP Key 1 :    WEP Key 2 :    WEP Key 3 :    WEP Key 4 :    WPA : WPA requires stations to use high grade encryption and authentication. WPA2 : WPA2 requires stations to use high grade encryption and authentication. WPA2-auto : WPA2-Auto requires stations to use high grade encryption and authentication. Cipher Type :   TKIP AES AUTO PSK / EAP :   PSK EAP Passphrase :   Confirmed Passphrase :   802.1X   RADIUS Server 1 :  IP      Port      Shared Secret   RADIUS Server 2 :  IP      Port      Shared Secret   Helpful Hints.. Wireless Network Name: Changing your Wireless Network Name is the first step in securing your wireless network. We recommend that you change it to a familiar name that does not contain any personal information. Auto Channel: We recommend that you Enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on. Visibility Status: Visibility Status is another way to secure your network. With this option enabled, no wireless clients will be able to see your wireless network when they perform scan to see what's available. In order for your wireless devices to connect to your router, you will need to manually enter the Wireless Network Name on each device. Security Keys: If you have enabled Wireless Security, make sure you write down WEP Key or Passphrase that you have configured. You will need to enter this information on any wireless device that you connect to your wireless network.        Copyright © 2004-2008 D-Link Systems, Inc.
Home > Screenshots > Dlink > DIR-450 > Wireless Settings