Routing for the Dlink DIR-655Router Sceenshot
Back to the Dlink DIR-655
D-LINK SYSTEMS, INC. | WIRELESS ROUTER : Advanced / Routing Firmware Version: 1.32NA Hardware Version: A4 Product Page: DIR-655 Setup Advanced Tools Status Support Internet Wireless Settings Network Settings Virtual Server Port Forwarding Application Rules QOS Engine Network Filter Access Control Website Filter Inbound Filter Firewall Settings Routing Advanced Wireless WISH Wi-Fi Protected Setup Advanced Network securespot Guest Zone Admin Time SysLog EMail Settings System Firmware Dynamic DNS System Check Schedules Device Info Logs Statistics Internet Sessions Wireless WISH Sessions Menu Setup Advanced Tools Status Glossary Reboot needed Your changes have been saved. The router must be rebooted for the changes to take effect. You can reboot now, or you can continue to make other changes and reboot later. Configuration Warnings Routing This Routing page allows you to specify custom routes that determine how data is moved around your network. Note: Only Administrator has access to these functionalities. 32--ROUTE LIST Metric Interface Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Name Destination IP WAN LAN --> Netmask Gateway Helpful Hints... Each route has a check box next to it, check this box if you want the route to be enabled. The name field allows you to specify a name for identification of this route, e.g. 'Network 2' The destination IP address is the address of the host or network you wish to reach. The netmask field identifies the portion of the destination IP in use. The gateway IP address is the IP address of the router, if any, used to reach the specified destination. More... Copyright © 2004-2008 D-Link Systems, Inc.
