Local Network for the Dlink DSL-2750URouter Sceenshot
menu Product Page: DSL-2750U Site Map Firmware Version: AF_1.60_R01 Setup Advanced Maintenance Status Help Wizard Internet Setup 3G Internet Setup Wireless Connection Local Network Time and Date Print Server Logout Local Network This section allows you to configure the local network settings of your router. Please note that this section is optional and you should not need to change any of the settings here to get your network up and running. Router Settings Use this section to configure the local network settings of your router. The Router IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again. Router IP Address : Subnet Mask : Configure the second IP Address and Subnet Mask for LAN interface IP Address : Subnet Mask : DHCP Server Settings (Optional) Use this section to configure the built-in DHCP Server to assign IP addresses to the computers on your network. Disable DHCP Server Enable DHCP Server DHCP IP Address Range : to DHCP Lease Time : (hours) Enable DHCP Server Relay DHCP Server IP Address : --> DHCP Reservations List Status Computer Name MAC Address IP Address Add DHCP Reservation (Optional) Enable : Computer Name : IP Address : MAC Address : Helpful Hints... The IP address of your router is the same IP address you will use to access the web management interface of your router. If you already have a DHCP server on your network or are using static IP addresses on all the devices on your network, click on Disable DHCP Server to disable this feature. If you have devices on your network that should always have fixed IP addresses, add a Static DHCP for each such device. More... Copyright © 2008-2011 D-Link Systems, Inc.